80
S
ca
n
n
in
g
10
Press
The display will return to the previous screen, and the memorized frequency and
memory channel number will be displayed.
1
Switch to the memory mode
2
Recall the PMS memory of the upper frequency or lower frequency
3
Press
briefly
The function menu will be displayed.
Touch
Tip
When
is not displayed in the function menu,
touch
or
to switch the menu.
The programmable memory scan will be started.
Tips
• The scan can also be started by pressing the
or
button on the microphone for one second or
longer.
• When a signal is received, the scanning stops for three seconds and then the scanning starts
again.
• To stop the scanning, either touch
or press the microphone
button (the radio
will not transmit in this case).
• The squelch level may be adjusted using the following procedure during scanning.
Touch
When the upper and lower frequencies are not set correctly, the programmable memory scan will not
work.
