29
In
st
a
lla
tio
n
a
n
d
C
o
n
n
e
ct
io
n
Make sure the power supply is switched OFF before connecting the cable between the controller and
the main body.
1
Plug the connector of the controller cable into the
[CONTROL] jack at the front of the main body
until a click sound is heard
Main
body
Controller
cable
2
Plug the other connector of the controller cable
into the [CONTROL] jack at the back of the
controller until a click sound is heard
Controller
Controller cable
1
Plug the microphone connector into the [MIC]
jack at the front of the main body until a click
sound is heard
• To remove the microphone, pull the connector out
while pressing the latch.
• Using the optional microphone extension kit “MEK-
2”, a microphone with a 8-pin connector can be
used. A microphone extension cable (about 3 m
long) is also included in MEK-2. Use it to install the
microphone in locations which cannot be reached
by the attached microphone cable.
Microphone
Connector
1
Attach the antenna co-axial cable to the [ANT]
terminal at the back of the main body and tighten
the connector
Main body
(rear side)
Co-axial cable connector
