Yaesu FTM-350AE, Technical Supplement

Page: 11 / 67

15
FTM-350AR/E Technical Supplement
15.Press the [ TFRQ
] key, then rotate the right
DIAL
knob to select "100.0 Hz".
16.Press the [ ESC
] key to save the new setting.
17.Press the [ ADJ
] key to set the alignment Menu
Item “
MOD xxx MOD xxx
MOD xxx MOD xxx
MOD xxx
”.
18.Rotate the left DIAL knob to select "
MOD 136H MOD 136H MOD 136H MOD 136H MOD 136H
".
19.Press the [ ADJ
] key to set the alignment Menu
Item “
CTC xxx CTC xxx CTC xxx CTC xxx CTC xxx
”.
20.Press the PTT switch to activate the transmitter,
adjust the left DIAL knob so that the Deviation
Meter reading is 0.65 kHz ~ 0.75 kHz.
The following steps is USA Version only.
21.Set the transceiver frequency to 223.550 MHz.
22.Press and hold in the [
F
] key for two seconds to
change the [
SMART FUNCTION
] key category to
the " SQL " functions.
23.Press the [
TYPE
] key repeatedly, until the "
TONE
ENC " notation appears.
24.Press the [ TFRQ
] key, then rotate the right
DIAL
knob to select "100.0 Hz".
25.Press the [ ESC
] key to save the new setting.
26.Press the [ ADJ
] key to set the alignment Menu
Item “
MOD xxx MOD xxx MOD xxx MOD xxx MOD xxx
”.
27.Rotate the left DIAL knob to select "
MOD 126H MOD 126H
MOD 126H MOD 126H
MOD 126H
".
28.Press the [ ADJ
] key to set the alignment Menu
Item “
CTC xxx CTC xxx
CTC xxx CTC xxx
CTC xxx
”.
29.Press the PTT switch to activate the transmitter,
adjust the left DIAL knob so that the Deviation
Meter reading is 0.65 kHz ~ 0.75 kHz.
DCS TX Deviation
1. Set the transceiver frequency to 440.050 MHz.
2. Press the [
POW
] key to select "LOW".
3. Press and hold in the [ F
] key for two seconds to
change the [
SMART FUNCTION
] key category to
the " SQL " functions.
4. Press the [
TYPE
] key repeatedly, until the "
DCS "
notation appears.
5. Press the [ ESC
] key to save the new setting.
6. Press the [ ADJ
] key to set the alignment Menu
Item “
MOD xxx MOD xxx
MOD xxx MOD xxx
MOD xxx
”.
7. Rotate the left DIAL knob to select "
MOD 10EH MOD 10EH MOD 10EH MOD 10EH MOD 10EH
".
8. Press the [ ADJ
] key to set the alignment Menu
Item “
DCS xxx DCS xxx DCS xxx DCS xxx DCS xxx
”.
9. Press the PTT switch to activate the transmitter,
adjust the left
DIAL
knob so that the Deviation
Meter reading is 0.60 kHz ~ 0.80 kHz.
10.Set the transceiver frequency to 146.050 MHz.
11.Press the [
POW
] key to select "LOW".
12.Press and hold in the [
F
] key for two seconds to
change the [
SMART FUNCTION
] key category to
the " SQL " functions.
13.Press the [
TYPE
] key repeatedly, until the "
DCS "
notation appears.
14.Press the [ ESC
] key to save the new setting.
15.Press the [ ADJ
] key to set the alignment Menu
Item “
MOD xxx MOD xxx
MOD xxx MOD xxx
MOD xxx
”.
16.Rotate the left DIAL knob to select "
MOD 136H MOD 136H MOD 136H MOD 136H MOD 136H
".
17.Press the [ ADJ
] key to set the alignment Menu
Item “
DCS xxx DCS xxx DCS xxx DCS xxx DCS xxx
”.
18.Press the PTT switch to activate the transmitter,
adjust the left DIAL knob so that the Deviation
Meter reading is 0.60 kHz ~ 0.80 kHz.
The following steps is USA Version only.
19.Set the transceiver frequency to 223.550 MHz.
20.Press and hold in the [
F
] key for two seconds to
change the [
SMART FUNCTION
] key category to
the " SQL " functions.
21.Press the [
TYPE
] key repeatedly, until the "
DCS "
notation appears.
22.Press the [ ESC
] key to save the new setting.
23.Press the [ ADJ
] key to set the alignment Menu
Item “
MOD xxx MOD xxx MOD xxx MOD xxx MOD xxx
”.
24.Rotate the left DIAL knob to select "
MOD 126H MOD 126H
MOD 126H MOD 126H
MOD 126H
".
25.Press the [ ADJ
] key to set the alignment Menu
Item “
DCS xxx DCS xxx
DCS xxx DCS xxx
DCS xxx
”.
Alignment