![background image](http://html2.mh-extra.com/html/yaesu/ftm-10r/ftm-10r_technical-supplement_3213744013.webp)
13
FTM-10R/E Technical Supplement
DCS TX Deviation
1. Press the
key repeatedly to display the fre-
quency.
2. Set the transceiver frequency to 146.050 MHz.
3. Press and hold the
key for one second to
enter the Menu mode.
4. Rotate the
DIAL
knob to select Menu Item "
F44 TX POW-
F44 TX POW-
F44 TX POW-
F44 TX POW-
F44 TX POW-
ER
ER
ER
ER
ER
".
5. Press the
key, then rotate the
DIAL
knob to select
"
LOW
".
6. Press the
key, then rotate the
DIAL
knob to select
Menu Item "
F40 SQL TYPE
F40 SQL TYPE
F40 SQL TYPE
F40 SQL TYPE
F40 SQL TYPE
".
7. Press the
key, then rotate the
DIAL
knob to select
"
DCS
".
8. Press the
key to save the new setting and
exit the Menu mode.
9. Press the
key repeatedly to display the
Alignment Menu.
10.Press the
key repeatedly to select Alignment Menu
Item "
A-4 DCS. xxx
A-4 DCS. xxx
A-4 DCS. xxx
A-4 DCS. xxx
A-4 DCS. xxx
".
11.Key the transmitter (with no microphone input), ro-
tate the
DIAL
knob to adjust the transmit DCS devia-
tion to 0.7 kHz (±0.05 kHz) on the deviation meter.
12.Press the
key repeatedly to display the fre-
quency.
13.Set the transceiver frequency to 440.050 MHz.
14.Press the
key repeatedly to display the
Alignment Menu.
15.Press the
key repeatedly to select Alignment Menu
Item "
A-4 DCS. xxx
A-4 DCS. xxx
A-4 DCS. xxx
A-4 DCS. xxx
A-4 DCS. xxx
".
16.Key the transmitter (with no microphone input), ro-
tate the
DIAL
knob to adjust the transmit DCS devia-
tion to 0.7 kHz (±0.05 kHz) on the deviation meter.
17.Press the
key to save the new setting and
exit the Alignment Menu mode.
CTCSS TX Deviation
1. Press the
key repeatedly to display the fre-
quency.
2. Set the transceiver frequency to 146.050 MHz.
3. Press and hold the
key for one second to
enter the Menu mode.
4. Rotate the
DIAL
knob to select Menu Item "
F44 TX POW-
F44 TX POW-
F44 TX POW-
F44 TX POW-
F44 TX POW-
ER
ER
ER
ER
ER
".
5. Press the
key, then rotate the
DIAL
knob to select
"
LOW
".
6. Press the
key, then rotate the
DIAL
knob to select
Menu Item "
F40 SQL TYPE
F40 SQL TYPE
F40 SQL TYPE
F40 SQL TYPE
F40 SQL TYPE
".
7. Press the
key, then rotate the
DIAL
knob to select
"
TONE ENC
".
8. Press the
key, then rotate the
DIAL
knob to select
Menu Item "
F39 SQL TSQF
F39 SQL TSQF
F39 SQL TSQF
F39 SQL TSQF
F39 SQL TSQF
".
9. Press the
key, then rotate the
DIAL
knob to select
"
100.0 HZ
".
10.Press the
key to save the new setting and
exit the Menu mode.
11.Press the
key repeatedly to display the
Alignment Menu.
12.Press the
key repeatedly to select Alignment Menu
Item "
A-5 CTC. xxx
A-5 CTC. xxx
A-5 CTC. xxx
A-5 CTC. xxx
A-5 CTC. xxx
".
13.Key the transmitter (with no microphone input), ro-
tate the
DIAL
knob to adjust the transmit CTCSS devi-
ation to 0.7 kHz (±0.05 kHz) on the deviation meter.
14.Press the
key repeatedly to display the fre-
quency.
15.Set the transceiver frequency to 440.050 MHz.
16.Press the
key repeatedly to display the
Alignment Menu.
17.Press the
key repeatedly to select Alignment Menu
Item "
A-5 CTC. xxx
A-5 CTC. xxx
A-5 CTC. xxx
A-5 CTC. xxx
A-5 CTC. xxx
".
18.Key the transmitter (with no microphone input), ro-
tate the
DIAL
knob to adjust the transmit CTCSS devi-
ation to 0.7 kHz (±0.05 kHz) on the deviation meter.
19.Press the
key to save the new setting and
exit the Alignment Menu mode.
Alignment
Summary of Contents for FTM-10R
