28
Function Menu Display
FUNC key
MULTI knob
Press the [FUNC] key to call up the function screen for setting various functions. The setting menu (page 88) is
also called from the function screen. Press again to return to the normal operation screen.
Touch a MENU item, or rotate the [MULTI] control knob to make a selection.
Operation of the Display MULTI Knob
[MULTI] displays the operation of the [MULTI] knob.
Normally, it is recommended to adjust the level of the spectrum scope as the [LEVEL] knob control of [S.MENU].
The last function used is stored in the [MULTI] control, it can easily set by operating the [MULTI] control.
Operation of the MULTI knob
MULTI knob
The following settings and operations can be performed with the [MULTI] control.
SPEED*
:
Set Scope Sweep Speed.
PEAK*
:
Adjust the Peak Signal Color Density.
MARKER*
: ON/OFF Marker indicates the transmit
and receive frequency position within the
Scope Display image.
COLOR*
:
Changes the scope display color.
LEVEL*
:
Adjust the reference level to make it eas-
ier to distinguish the scope display target
signal from the noise.
*These items may be called up by pressing the
[S.MENU] key.
RF POWER
:
Transmit power setting
MONI LEVEL
: Monitor level adjustment
DNR LEVEL
: DNR level setting
NB LEVEL
:
Noise blanker level setting
VOX GAIN
:
VOX gain setting
VOX DELAY
: VOX delay setting
ANTI VOX
:
Anti-VOX Settings
STEP DIAL
:
Frequency change at predetermined
frequency step
MEM CH
:
Memory channel selection
GROUP
:
Memory group selection
R. FIL
:
Roofing filter bandwidth selection
