89
U
s
in
g
th
e
G
P
S
F
u
n
c
tio
n
Method of Positioning by GPS
Saving GPS Information (GPS Log Function)
The GPS position information can automatically be saved periodically onto a microSD
memory card. Using the saved data, tracks can be displayed on commercially available
map software*.
* Technical support for the map software is not provided by YAESU.
1
See “Activating the GPS Function” on page 86, and activate the GPS function.
2
Press the
key for over one second.
The transceiver enters Set mode.
3
Touch
[CONFIG]
.
4
Touch
[6 GPS LOG]
.
5
Rotate the DIAL to select the GPS data logging interval.
The selectable setting values are as follows. When OFF is set, the position
information is not saved.
OFF / 1 sec / 2 sec / 5 sec / 10 sec / 30 sec / 60 sec
6
Press .
The GPS log function is activated, and the transceiver exits from Set mode.
Tip
The position information is saved periodically unless “OFF” is selected in step 5 (shown above) or the
power of the transceiver is turned off.
Reselecting the GPS data logging interval in step 5 or turning on the transceiver again, begins saving
the GPS data under a different file name.
