78
S
c
a
n
n
in
g
F
u
n
c
tio
n
Memory Channel Scanning
7
Press .
The transceiver exits from Set mode.
Tips
• When the channel is registered as a skip memory,
lights up.
• When the channel is registered as a specified memory,
blinks.
• To cancel the skip memory or specified memory setting, select [OFF] in step 6. The on the
LCD turns off and the setting is canceled.
Skip memory
[SKIP]
Specified
memory
[SELECT]
Rotate the DIAL
clockwise
[OFF]
Scanning Only the Specified Memory Channels
1
Press the
key to enter Memory mode.
2
Select the memory channel registered as a specified memory channel.
3
Touch
[F MW]
.
The function menu appears on the LCD.
4
Touch
[SCAN]
.
Tips
• Rotate the DIAL clockwise to start scanning toward higher frequencies
• Only the memory channels registered as the specified memory channels are scanned.
• When a signal is received during scanning, a beep sound is emitted. Scanning stops for 5
seconds to monitor the cannel frequency.
• When scanning stops, the decimal point blinks and the LCD remains illuminated.
• After receiving the signal for 5 seconds, scanning resumes.
• Press
to cancel scanning.
• To select the range for scanning, enter Set mode by pressing and holding the
key for
over one second, then select
[SCAN]
followed by
[5 SCAN WIDTH]
.
