140
C
u
s
to
m
iz
e
M
e
n
u
S
e
tti
n
g
s
fo
r I
n
d
iv
id
u
a
l U
s
e
(
S
e
t M
o
d
e
)
Set Mode: SIGNALING Menu Operations
Setting the Squelch to Activate at a Specified Signal Strength
S-Meter Squelch Function
You can set A-Band and B-Band individually to emit audio only when receiving a signal
stronger than the S-meter Squelch level setting.
To adjust the S-Meter squelch, first set the operating band by pressing the
key.
1
Touch
[9 SQL S-METER]
.
2
Rotate the DIAL to select the setting value referring to the table below.
Remark
The default setting: OFF
Display
S-Meter Display
Operating Status
OFF
No display
S-Meter
squelch
function
is
OFF.
(By default, S-Meter squelch function is set to
OFF.)
LEVEL1
Outputs the audio of a signal as strong or
stronger than the S-Meter level 1.
LEVEL2
Outputs the audio of a signal as strong or
stronger than the S-Meter level 2.
LEVEL3
Outputs the audio of a signal as strong or
stronger than the S-Meter level 3.
LEVEL4
Outputs the audio of a signal as strong or
stronger than the S-Meter level 4.
LEVEL5
Outputs the audio of a signal as strong or
stronger than the S-Meter level 5.
LEVEL6
Outputs the audio of a signal as strong or
stronger than the S-Meter level 6.
LEVEL7
Outputs the audio of a signal as strong or
stronger than the S-Meter level 7.
LEVEL8
Outputs the audio of a signal as strong or
stronger than the S-Meter level 8.
LEVEL9
Outputs the audio of a signal as strong or
stronger than the S-Meter level 9.
Setting the Squelch Type for Transmit and Receive
SQL EXPANSION Function
You can add squelch types to
[11 SQL TYPE]
for transmit and receive, respectively.
1
Rotate the DIAL, then touch
[10 SQL EXPANSION]
.
2
Rotate the DIAL to select the desired setting.
ON
Add squelch types for transmit and receive, respectively.
OFF
Does not add squelch types for transmit and receive, respectively.
Remark
The default setting: OFF
