Yaesu FT DX 9000MP CONTEST - DATA MANAGEMENT OPERATION, Operation Manual

Page: 9 / 180

Page 7 FT
DX
9000MP O
PERATION
M
ANUAL
7. Resetting the Microprocessor
S
Resetting Memories (Only)
Use this procedure to reset (clear out) the Memory channels previously stored, without affecting any configuration changes
you may have made to the Menu settings.
1. Press the front panel’s [
POWER
] switch to turn the
transceiver off.
2. Press and hold in the [ A M
] switch; while holding it
in, press and hold in the front panel’s [
POWER
] switch
to turn the transceiver on. Once the transceiver comes
on, you may release the [
A M
] switch.
S
Menu Resetting
Use this procedure to restore the Menu settings to their factory defaults, without affecting the memories you have pro-
grammed.
1. Press the front panel’s [
POWER ] switch to turn the
transceiver off.
2. Press and hold in the [ MNU
] (Menu) key; while hold-
ing it in, press and hold in the front panel’s [
POWER
]
switch to turn the transceiver on. Once the transceiver
comes on, you may release the [
MNU
] (Menu) key.
S
Full Reset
Use this procedure to restore all Menu and Memory settings to their original factory defaults. All Memories will be cleared
out by this procedure.
1. Press the front panel’s [
POWER
] switch to turn the
transceiver off.
2. Press and hold in the [ FAST
] and [
LOCK
] switches;
while holding them in, press and hold in the front
panel’s [
POWER
] switch to turn the transceiver on.
Once the transceiver comes on, you may release the
other two switches.
[FAST] Switch
&
[LOCK] Switch
POWER] Switch
A M] Switch POWER] Switch
MMU] Key POWER] Switch
BBBBB
EFORE EFORE
EFORE EFORE EFORE
Y Y Y Y Y
OU OU
OU OU OU
B B B B B
EGIN EGIN
EGIN EGIN EGIN
. . . . . .
. . . . . .
. . .