Yaesu FT DX 9000MP CONTEST - DATA MANAGEMENT OPERATION, Operation Manual, Page: 132 / 180

Page 130 FT
DX
9000MP O
PERATION
M
ANUAL
MMMMM
EMOR EMOR
EMOR EMOR EMORYYYYY
O O O O O
PERA PERA
PERA PERA PERATION
TION
TION TION TION
1. Press the [ MCH/GRP
] key momentarily. The imbed-
ded LED will glow Red, indicating that you are now
ready to view memory channel contents.
A A
A A A
D D D D DVICE VICE VICE VICE VICE
:
If the Red LED imbedded in the [ MCH/GRP
] switch
does not light up, check to be sure that the orange lamp
to the right of the [
CLAR/VFO-B
] knob is not illumi-
nated. It it is, press the [ A/B
] switch to make it go out,
then press the [ MCH/GRP
] key again.
2. Press the [ A
X
M
] key.
The data stored in the currently-selected memory chan-
nel will be displayed in the Sub (VFO-B) band fre-
quency field.
3. Rotate the [ CLAR/VFO-B
] knob to select the memory
channel that you would like to erase.
4. Press the [ LOCK
] switch to erase the contents of the
selected memory channel.
E
RASING
M
EMORY
C
HANNEL
D
ATA
[CLAR/VFO-B] Knob
[A
X
M] Switch
[A/B] Switch
[MCH-GRP] Switch
VDD TEMP SWR BIAS
[LOCK] Switch
A A
A A A
D D D D DVICE VICE VICE VICE VICE
After erasure, only the memory channel num-
ber will remain; the frequency data will disap-
pear from the display.
If you make a mistake and wish to restore the
memory’s contents, just repeat steps (1) through
(3) above.