Yaesu FT-950, Manual

Page: 15 / 15

Page 118 FT-950 O
PERATING
M
ANUAL
114 TGEN VOX SEL
Function : Selects the audio input source for triggering TX
during VOX operation.
Available Values : nic/dAtA
Default Setting : nic
nic (MIC): The VOX function will be activated by mi-
crophone audio input.
dAtA (DATA): The VOX function will be activated by
data audio input port (pin 1) of the
RTTY/
PKT Jack.
115 TGEN V GAIN
Function : Adjusts the “VOX” Gain on the SSB/AM/FM
modes.
Available Values : 0 ~ 100
Default Setting : 50
116 TGEN VOX DLY
Function : Adjusts the “VOX” Delay (receiver recovery)
time on the SSB/AM/FM modes.
Available Values : 30 ~ 3000 msec (10 msec/step)
Default Setting : 500 msec
117 TGEN ANTIVOX
Function : Adjusts the Anti-VOX Trip Gain, which is the
level of negative AF feedback of receiver audio to the mi-
crophone, to prevent receiver audio from activating the
transmitter (via the microphone) during VOX operation.
Available Values : 0 ~ 100
Default Setting : 50
118 TGEN EMRGNCY
Function : Enables Tx/Rx operation on the Alaska Emer-
gency Channel, 5167.5 kHz.
Available Values : EnA(ENABLE)/diS(DISABLE)
Default Setting : diS(DISABLE)
When this Menu Item is set to “EnA(ENABLE),” the spot
frequency of 5167.5 kHz will be enabled. The Alaska
Emergency Channel will be found between the Memory
channels “P-1” and “01 (or 1-01).”
Important: The use of this frequency is restricted to sta-
tions operating in or near Alaska, and only for emergency
purposes (never for routine operations). See §97.401(c)
of the FCC’s regulations for details.
TX GENERAL G
ROUP
109 TGEN PROCLVL
Function : Sets a compression level of the Speech Proces-
sor.
Available Values : 1 ~ 100
Default Setting : 50
110 TGEN EXT TUN
Function : Enable/disable the optional FC-40 Antenna
Tuner.
Available Values : itu/Etu (INTERNAL TUNER/EXTER-
NAL TUNER)
Default Setting : itu (INTERNAL)
itu (INTERNAL TUNER): The [ TUNE
] button will ac-
tivate the internal Antenna
Tuner.
Etu (EXTERNAL TUNER): The [ TUNE
] button will ac-
tivate the optional FC-40
Antenna Tuner.
111 TGEN TX PWR
Function : Sets a transmitter output level.
Available Values : 5 ~ 100 %
Default Setting : 100 %
112 TGEN AM CAR
Function : Sets a carrier power output level.
Available Values : 0 ~ 100
Default Setting : 50
113 TGEN PWRCTRL
Function : Setting the menu item “
111 TGEN TX PWR 111 TGEN TX PWR
111 TGEN TX PWR 111 TGEN TX PWR
111 TGEN TX PWR
”.
Available Values : ALL/CAr
Default Setting : ALL
ALL: The Menu Item “
111 TGEN TX PWR 111 TGEN TX PWR
111 TGEN TX PWR 111 TGEN TX PWR
111 TGEN TX PWR
” affects all
modes except AM.
CAr: The Menu Item “
111 TGEN TX PWR 111 TGEN TX PWR
111 TGEN TX PWR 111 TGEN TX PWR 111 TGEN TX PWR
” affects all
modes except SSB. In this case, the SSB output
power will be set to maximum, regardless of the
setting of the Menu Item “
111 TGEN TX PWR 111 TGEN TX PWR
111 TGEN TX PWR 111 TGEN TX PWR 111 TGEN TX PWR
”.
M
ENU
M
ODE