Page 113
FT-950 O
PERATING
M
ANUAL
MODE-FM G
ROUP
056 F3E MIC
Function
: Sets the microphone gain for the FM mode.
Available Values
: Ur/0 ~ 100
Default Setting
: 50
When this menu is set to “Ur”, you may adjust the micro-
phone gain using the front panel’s [
MIC GAIN
] knob.
057 F3E 28 RPT
Function
: Sets the magnitude of the repeater shift on the
28 MHz band.
Available Values
: 0 ~ 1000 kHz (10 kHz/step)
Default Setting
: 100 kHz
058 F3E 50 RPT
Function
: Sets the magnitude of the repeater shift on the
50 MHz band.
Available Values
: 0 ~ 4000 kHz (10 kHz/step)
Default Setting
: 1000 kHz
MODE-RTTY G
ROUP
059 RTTY R PLRTY
Function
: Selects normal or reverse Mark/Space polarity
for RTTY receive operation.
Available Values
: nor/rEV
Default Setting
: nor
060 RTTY T PLRTY
Function
: Selects normal or reverse Mark/Space polarity
for RTTY transmit operation.
Available Values
: nor/rEV
Default Setting
: nor
061 RTTY OUT LVL
Function
: Sets the RTTY (AFSK) data output level at the
output port (pin 5) of the
RTTY/PKT
jack.
Available Values
: 0 ~ 100
Default Setting
: 50
062 RTTY SHIFT
Function
: Selects the frequency shift for RTTY (AFSK)
operation.
Available Values
:170/200/425/850 Hz
Default Setting
: 170 Hz
063 RTTY TONE
Function
: Selects the Mark tone for RTTY operation.
Available Values
: 1275/2125 Hz
Default Setting
: 2125 Hz
M
ENU
M
ODE
MODE-DATA G
ROUP
050 DATA DT GAIN
Function
: Sets the data input level from the TNC to the
AFSK modulator.
Available Values
: 0 ~ 100
Default Setting
: 50
051 DATA OUT LVL
Function
: Sets the AFSK data output level at the output
port (pin 5) of the
RTTY/PKT
jack.
Available Values
: 0 ~ 100
Default Setting
: 50
052 DATA VOX DLY
Function
: Adjusts the “VOX” Delay (receiver recovery)
time in the PACKET mode.
Available Values
: 30 ~ 3000 msec (10 msec/step)
Default Setting
: 300 msec
053 DATA V GAIN
Function
: Adjusts the “VOX” Gain in the PACKET mode.
Available Values
: 0 ~ 100
Default Setting
: 50
054 DATA PKTDISP
Function
: Sets the packet frequency display offset.
Available Values
: –3000 ~ +3000 Hz (10 Hz/step)
Default
: 0 Hz
055 DATA PKT SFT
Function
: Sets the carrier point during the SSB packet
operation.
Available Values
: –3000 ~ +3000 Hz (10 Hz/step)
Default
: 1000 Hz (typical center frequency for PSK31,
etc.)
