Yaesu FT-950, Manual

Page: 13 / 15

Page 116 FT-950 O
PERATING
M
ANUAL
TUNING G
ROUP
084 TUN DIALSTP
Function : Setting of the Main Tuning Dial knob’s and the
[
CLAR/VFO-B
] knob’s tuning speed on the SSB, CW,
and AM modes.
Available Values : 1/5/10 Hz
Default Setting : 10 Hz
085 TUN CW FINE
Function : Enabling/disabling of the “Fine” tuning speed
in the CW mode.
Available Values : EnA/diS (ENABLE/DISABLE)
Default Setting : diS (DISABLE)
EnA (ENABLE): Tuning in 1 Hz steps on the CW mode.
diS (DISABLE): Tuning according to the steps deter-
mined via menu item “
084 TUN 084 TUN 084 TUN 084 TUN 084 TUN
DIALSTP DIALSTP DIALSTP DIALSTP DIALSTP
”.
086 TUN MHz SEL
Function : Selects the tuning steps for the [ CLAR/VFO-
B
] knob when the [
MHz
] button is pressed.
Available Values : 1/0.1 MHz
Default Setting : 1 MHz
087 TUN AM STEP
Function : Selects the tuning steps for the microphone’s
[
UP
]/[
DWN
] keys in the AM mode.
Available Values : 2.5/5/9/10/12.5 kHz
Default Setting : 5 kHz
088 TUN FM STEP
Function : Selects the tuning steps for the microphone’s
[
UP
]/[
DWN
] keys in the FM mode.
Available Values : 5/6.25/10/12.5/20/25 kHz
Default Setting : 5 kHz
089 TUN FM DIAL
Function : Setting of the Main Tuning Dial knob’s and the
[
CLAR/VFO-B
] knob’s tuning speed in the FM mode.
Available Values : 10/100 Hz
Default Setting : 100 Hz
090 TUN MY BAND
Function : Programs a band to be skipped while selecting
bands using the [
CLAR/VFO-B
] knob.
To program the band to be skipped, rotate the [ CLAR/
VFO-B
] knob to recall the band to be skipped while se-
lecting bands via the [
CLAR/VFO-B
] knob, then press
the [ ENT
] button to change this setting to “ON” (a “
d dd dd
”
notation will replace the “
E EE
EE
” notation). Repeat the same
procedure to cancel the setting (skipped “Off”: “
d dd dd
” nota-
tion appears).
TX AUDIO G
ROUP
091 TAUD EQ1 FRQ
Function : Selects the center frequency of the lower range
for the parametric microphone equalizer.
Available Values : OFF/100 ~ 700 Hz (100 Hz/step)
Default Setting : OFF
OFF: The equalizer gain and Q-factor are set to fac-
tory defaults (flat).
100 ~ 700: Center frequencies of 100 Hz ~ 700 Hz.
You may adjust the equalizer gain and Q-factor at this se-
lected audio frequency via menu items “
092 TAUD EQ1 092 TAUD EQ1 092 TAUD EQ1 092 TAUD EQ1 092 TAUD EQ1
LVL LVL
LVL LVL LVL
” and “
093 TAUD EQ1 BW 093 TAUD EQ1 BW
093 TAUD EQ1 BW 093 TAUD EQ1 BW 093 TAUD EQ1 BW
”.
092 TAUD EQ1 LVL
Function : Adjusts the equalizer gain of the low range of
the parametric microphone equalizer.
Available Values : –20 ~ +10
Default Setting : +5
093 TAUD EQ1 BW
Function : Adjusts the Q-factor of the low range of the
parametric microphone equalizer.
Available Values : 1 ~ 10
Default Setting: 10
094 TAUD EQ2 FRQ
Function : Selects the center frequency of the middle range
for the parametric microphone equalizer.
Available Values : OFF/700 ~ 1500 Hz (100 Hz/step)
Default Setting : OFF
OFF: The equalizer gain and Q-factor are set to fac-
tory defaults (flat).
700 ~ 1500: Center frequencies of 700 Hz ~ 1500 Hz.
You may adjust the equalizer gain and Q-factor at this se-
lected audio frequency via menu items “
095 TAUD EQ2 095 TAUD EQ2
095 TAUD EQ2 095 TAUD EQ2 095 TAUD EQ2
LVL LVL
LVL LVL
LVL
” and “
096 TAUD EQ2 BW 096 TAUD EQ2 BW
096 TAUD EQ2 BW 096 TAUD EQ2 BW
096 TAUD EQ2 BW
”.
095 TAUD EQ2 LVL
Function : Adjusts the equalizer gain of the middle range
of the parametric microphone equalizer.
Available Values : –20 ~ +10
Default Setting : +5
096 TAUD EQ2 BW
Function : Adjusts the Q-factor of the middle range of the
parametric microphone equalizer.
Available Values : 1 ~ 10
Default Setting : 10
M
ENU
M
ODE