![background image](http://html2.mh-extra.com/html/yaesu/ft-8800r/ft-8800r_operating-manual_3139653062.webp)
60
FT-8800R Operating Manual
M
ENU
(“
S
ET
”)
M
ODE
Function
Selects the Automatic Power Off time (time before power
goes off).
Activates/deactivates the Automatic Repeater Shift feature.
Selects the ARTS beep mode.
Enables/disables the VFO Band edge for the current band.
Enables/disables the beeper
Shifting of CPU clock frequency.
Enables/disables the CW identifier during ARTS operation.
Stores your callsign into the CW identifier. Up to six char-
acters may be stored.
Setting of the Display brightness level.
Setting the DCS code.
Selects “Normal” or “inverted” DCS coding.
Selects the Sub Band display format.
Setting of the DTMF Autodialer Delay Time.
Setting of the DTMF Autodialer Sending Speed.
Loading of the DTMF Autodialer Memories.
Enables/disables the Automatic Writing feature for the
Hyper Memory.
Selects the Internet Connection mode.
Selects the Access Number (DTMF digit) for WIRES™ op-
eration.
Selects the Access Number (DTMF code) for non-WIRES™
Internet Link System access.
Selects the key functions for the “right” band function
switches.
Enables/disables the Key/Button Lock feature.
Enables/disables the PTT Lock feature.
Selects the microphone type to be used.
Selects the Audio Mute mode.
Stores an Alpha-Numeric “Tag” for a memory channel.
Sets the transceiver’s circuitry for the Packet baud rate to
be used.
Sets the receiving band for Packet operation.
Programming the microphone’s [
P1
]/[
ACC
] button assign-
ment.
Programming the microphone’s [
P2
]/[
P
] button assignment.
Programming the microphone’s [
P3
]/[
P1
] button assign-
ment.
Programming the microphone’s [
P4
]/[
P2
] button assign-
ment.
Adjustd the RF SQL threshold level.
Sets the Repeater Shift Direction
Selects the Scan-Resume mode.
Selects the Memory Scan mode
Sets the magnitude of the Repeater Shift.
Sets the “flag” for the Memory Scan List
Sets the Synthesizer steps.
Defines the audio path to the external speaker (when used).
Sets the CTCSS Tone Frequency.
Selects the Tone Encoder and/or Decoder mode.
Sets the Time-Out Timer.
Enables/disables the VFO Tracking feature.
Reducing the MIC Gain (and Deviation).
Switches the Cross-Band Repeater feature on and off.
Enables/disables the AM mode.
Selects the receiving mode.
Menu Item
APO
ARS
ARTS
BAND
BEEP
CLK.SFT
CWID
CWID W
DIMMER
DCS.COD
DCS.N/R
DSP.SUB
DTMF D
DTMF S
DTMF W
HYPER
INET
INET C
INET M
KEY.MOD
LOCK
LOCKT
MIC
MUTE
NAME
PKT.SPD
PKT.RXB
PG P1
PG P2
PG P3
PG P4
RF SQL
RPT.MOD
SCAN
SCAN M
SHIFT
SKP.MSM
STEP
SPCONT
TONE F
TONE M
TOT
VFO.TR
WID.NAR
X-RPT
AM
AUT.AM
Available Values
OFF/ 0.5H - 12H
ON/ OFF
IN RNG/ ALWAYS
BND ON/ BNDOFF
BEP.ON / BEP.OFF
SFT.ON/ SFT.OFF
TX ON/ TX OFF
—
DIM 1/DIM 2/ DIM 3/ OFF
104 standard DCS Code
TRX N/ RX R/ TX R/ TRX R
FREQ/ CWID / DC-IN / OFF
50MS/ 250MS/ 450MS/
750MS/ 1000MS
50MS/ 75MS/ 100MS
—
MANUAL/ AUTO
INT.COD/ INT.MEM
CODE 0 - 9 / A / B / C / D / E / F
d-1 - d-16
KEY1 / KEY2
ON/ OFF
OFF/ BAND R /
BAND L / BOTH
MH-48/ MH-42
OFF/ TX/ RX/ (TX/ RX)
—
1200BPS/ 9600BPS
MAIN/ R-FIX/ L-FIX
SCAN / SQL.OFF/
TCALL / RPTR/ PRI /
LOW / TONE /
MHz/ REV/ HOME /
BAND/ (VFO/ MR)
OFF/ S-2/ S-5 /S-9/ S-FULL
RPT.OFF/ RPT.– / RPT.+
TIME/ BUSY
MEM/ MSM
0.00 - 99.50 MHz
OFF/SKIP/MSM
5.0k/ 10.0k/ 12.5k/ 15k
20.0k/ 25.0k/ 50.0k
EXT/ OFF/ INT.EXT/ INT
50 Standard CTCSS Tones
OFF/ ENC / ENC.DEC / DCS
1 - 30 minutes/ OFF
ON/ OFF
WIDE / NARROW
—
ON/ OFF
AUTO/ OFF
Default
OFF
1
—
BND ON
BEP.ON
SFT.OFF
TX OFF
—
DIM 1
023
TRX N
FREQ
450MS
50MS
—
MANUAL
INT.COD
CODE 1
d-1
KEY1
OFF
OFF
2
OFF
—
1200BPS
MAIN
BAND
VFO/MR
TONE
LOW
OFF
RPT.OFF
TIME
MEM
1
OFF
1
EXT
100 Hz
OFF
6 minute
OFF
WIDE
—
OFF
AUTO
1: Depends on the band of operation.
2: Depends on transceiver version.
Item #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47