![background image](http://html2.mh-extra.com/html/yaesu/ft-8800r/ft-8800r_operating-manual_3139653017.webp)
15
FT-8800R Operating Manual
[
SCN
]
Key
([
SUB
]
Key
)
Key Mode “1”
([
SCN
]
Key
: Default)
Press this key momentarily to activate the Scanner on the “
Right
” band.
When the “
right
” band is set to the Memory mode, press and hold in this key for 1/2
second to shift to the “Memory Tuning” feature.
Key Mode “2”
([
SCN
]
Key
)
Press this key momentarily to make the next key you press act on the “
Sub
” band (the
“
” icon will blink on the “
Sub
” band).
7
VOL
SQL
Knob (Right)
The inner
VOL
(Volume) control adjusts the speaker audio level from the “
right
” re-
ceiver. Clockwise rotation increases the audio level.
Press and hond in this knob for 2 seconds to turn the radio “on” and “off.”
The outer
SQL
(Squelch) control is used to silence background noise on the “
right
”
receiver. It should be advanced clockwise just to the point where the noise is silenced
(and the “
” indicator on the display turns off), so as to provide the best sensitivity
to weak signals.
8
DIAL
knob (Right)
This 20-position detented rotary switch is the tuning dial for the “
right
” band.
Press this knob momentarily to switch the “Main band” to be the “
right
” band.
When the “
right
” band is set to be the “
Main
” band in the VFO mode, press this knob to
enable rapid tuning (in 1 MHz steps) using this knob.
Press and hold in this knob for 1/2 second to toggle the operating band on the
“right
”
side as follows:
430
MHz
850
MHz
144
MHz
250
MHz
350
MHz
430
MHz ......
F
RONT
P
ANEL
C
ONTROLS
& S
WITCHES