Yaesu FT-8800R, Operating Manual

Page: 51 / 72

49 FT-8800R Operating Manual
To speed at which the DTMF digits are sent can be changed. Three speed levels are avail-
able: 50 ms (High: 20 digits per second), 75 ms (Mid: 13 digits per second), and 100 ms
(Low: 10 digits per second).
To select the speed, use the following procedure:
1. Press the [
SET
] key momentarily to enter the Set mode.
2. Rotate the “ Main ” band DIAL knob to select Menu #14 ( DTMF S ).
3. Press the “ Main ” band
DIAL
knob momentarily, then rotate the “ Main ” band
DIAL
knob
to select the desired speed.
4. Press and hold in the “
Main
” band
DIAL
knob for 1/2 second to save the new setting and
exit to normal operation.
You can also set a longer delay between the time you press the [ HM
] key (with
PTT switch
pressed) and the first DTMF digit is sent.
To set a delay time, use the following procedure:
1. Press the [
SET
] key momentarily to enter the Set mode.
2. Rotate the “
Main
” band
DIAL
knob to select Menu #13 ( DTMF D ).
3. Press the “ Main ” band DIAL knob momentarily, then rotate the “ Main ” band DIAL knob
to select the desired time ( 50 / 250 / 450 / 750 / 1000 ms).
4. Press and hold in the “ Main ” band DIAL knob for 1/2 second to save the new setting and
exit to normal operation.
DTMF A
UTODIALER
O
PERATION