37
FT-8800R Operating Manual
H
YPER
M
EMORY
M
ODE
The
FT-8800R
usually stores, into memory, the operating frequency and some aspects of
operating status (such as CTCSS/DCS data, repeater shift, power level etc.). However, the
“Hyper Memory” Mode allows you to store the total current configuration of the radio into
a special “Hyper” memory bank.
For example, a Hyper Memory location may store the frequencies of both the “Left” and
“right” bands, plus Scanning features, etc.
Hyper Memory Storage
1. Set up the transceiver according to the desired configuration.
2. Press and hold in the Hyper Memory key ([
1
] through [
6
]), corresponding to the Hyper
Memory channel into which you wish to store this configuration, for 2 seconds.
Hyper Memory Recall
Press the appropriate Hyper Memory key ([
1
] through [
6
]) to recall the desired Hyper Memory
channel.
The current (original) configuration will lost when you recall the Hyper Memory
Channel. To prevent this from happening, press and hold in the Hyper Memory
key (generally the
[
1
]
key) to store the current configuration into that Hyper Memory
Channel before recalling the Hyper Memory Channel, or set Menu #16 to enable the
Automatic Writing feature for the Hyper Memory. See page 63 for details.
M
EMORY
O
PERATION