![background image](http://html2.mh-extra.com/html/yaesu/ft-70dr/ft-70dr_advance-manual_3138230004.webp)
4
FT-70DR/DE Advance Manual
Digital Personal ID (DP-ID) feature
About the Digital Personal ID (DP-ID) feature
When operating in digital C4FM communications, each transceiver is programmed with,
and sends its own individual ID information (Radio ID) in each transmission. The DP-ID
function and the individual identification information, makes possible group communica-
tions of stations that are within communications range.
Digital Personal ID (DP-ID) feature opens the speaker audio only when a signal set to
the same DP-ID in the Digital Mode is received, even if each transceiver is set a differ-
ent Digital Group ID (DG-ID) number.
The digital C4FM repeater equipped with the DP-ID function allows preferentially contact
in an emergency, regardless of the repeater setting or if the repeater is being used with-
out the DG-ID setting.
z
Digital C4FM mode transceivers compatible with the DG-ID function are required in order to
utilize this function.
z
If the firmware is not compatible with the DG-ID function, update to the latest firmware to use
the DG-ID function. The latest firmware is available on the YAESU website. The latest firmware
is available on the YAESU website. The latest firmware is available on the YAESU website.
Registering the DP-ID of the other station
When setting the DG-ID code to “00”, the transceiver will receive signals from all digital C4FM
stations. To utilize the DP-ID function, it is necessary to set the receive DG-ID code to a number
other than “00”.
1. Press and hold the [
F
] key, to enter the Set Mode.
2. Rotate the
DIAL
knob to select [17 DP-ID].
3. Press the [
F
] key.
• The DP-ID list is displayed.
• If a number of DP-IDs are registered, rotate the
DIAL
knob to display the desired DP-ID.
4. A transmission in the digital C4FM mode from the other
transceiver will register the DP-ID.
When a signal from the other station is received, the call-
sign and “REG” are displayed on the LCD.
z
When a signal from another registered transceiver is received, nothing is display on the
LCD.
z
When registering a transceiver already registered with a different call sign, the call sign
registered in the DP-ID list is changed to the new registered call sign.