14
FT-70DR/DE Advance Manual
Changing between name tag display and frequency display
1. Recall the memory channel or the home channel to be changed.
2. Press the [
F
] key, then press the [
MODE
] key.
The display changes between the memory tag display and the frequency display.
• If a name tag has not been set for the memory/home channel, the beep sounds
and the display will not change.
If the memory channel or home channel is set to display the memory tag, pressing the [
F
] key
will temporarily display the frequency indication while “ ” is lighted.
The Memory Channel Only Mode
The FT-70DR/DE may be set to operated only in the registered memory channels.
1. While pressing the [
V/M
] key, press and hold the
POWER
(LOCK) switch to turn the
transceiver ON.
• The memory channel only mode is ON, the previously selected memory channel is
recalled.
• Rotating the
DIAL
knob may be selected.
• Inputting the 3 digits of the memory channel using the numeric keys may be re-
called the memory channel directly.
z
In the memory only mode, only the following functions will operate:
• Changing the communication mode (press the [
MODE
] key)
• Group monitor (GM) function (press the [
GM
] key)
• The transmission mode setting of the AMS function (press the [
AMS
] key)
• Turning the AMS function ON or OFF (press and hold the [
AMS
] key)
• Setting of the DG-ID code (press and hold the [
MODE
] key)
• Reverse function (press the [
F
] key, and then press the [
HM/RV
] key)
• Audio level adjustment (press the
VOL
key)
• SQL level adjustment (press the [
F
] key, and then press the
MONI/T-CALL
switch)
• Key lock function (press the
POWER
(LOCK) switch
z
Pressing the [
V/M
] key or the [
HM/VM
] key, will sound the beep, “M-ONLY” will be displayed,
and the function will not operate.
z
Canceling Memory Only Mode
1. Turn the transceiver OFF; and then while pressing the [
V/M
] key, press and hold the
POWER
(LOCK) switch to turn the transceiver ON.