Yaesu FT-65R/E, Operating Manual

Page: 21 / 31

5. The scanning will then resume according to the Scan-Resume mode select-
ed in the Set Mode Item “ 25:RESUME ”.
6. To cancel scanning, press the
PTT
switch or [▲] or [▼] key.
Programmed VFO Scan
1. Press the [ * V/M ] key to set the VFO mode, if neccesary.
2. Press and hold in the [
#BAND
] key for one second, then press [▲] [▼] key
to select the bandwidth for the Programmed VFO scanner.
Available selections are below.
Display Operation
BAND The scanner will sweep frequencies only on the current band.
±1MHz
The scanner will sweep frequencies within the ±1MHz frequency.
±2MHz The scanner will sweep frequencies within the ±2MHz frequency.
±5MHz The scanner will sweep frequencies within the ±5MHz frequency.
ALL The scanner will sweep all frequencies.
PMS
channels(1-10)
The scanner will sweep frequencies within the currently-selected PMS
frequency pair.
3. Press the [
#BAND
] key momentarily to save the new setting and exit to nor-
mal operation.
4. Press and hold the [ * V/M ] key for one second to start scanning.
PMS icon will appear on the LCD.
5. If and when the scanner encounters a signal strong enough to open the
squelch, the scanner will halt temporarily; the decimal point of the frequency
display will blink during this “Pause” condition.
6. The scanner will then resume according to the Scan-Resume mode select-
ed in the Set Mode Item “ 25:RESUME ”.
7. To cancel scanning, press the PTT switch, [ * V/M ] key, [▲] [▼] key, [ #BAND ],
or [ MONI ] key.
M
eMOry
s
Canning
Memory scanning is similarly easy to initiate:
1. Press the [ * V/M ] key to set the Memory mode, if neccesary.
2. Press and hold in either the [

] or [

] key for one second to initiate upward
or downward scanning, respectively.
During Scanning memory number will blink this “Resuming” condition.
3 To cancel scanning, press the PTT switch or [ * V/M ] key, [▲] [▼] key,
[ #BAND ], [ MONI ] key.
How to Skip (Omit) a Channel during Memory Scan Operation
As mentioned previously, some continuous-carrier stations like a Weather
Broadcast station will seriously impede scanner operation if you are using the
“Carrier Drop” Scan-Resume mode, as the incoming signal will not pause long
enough for the transceiver to resume scanning. Such channels may be “Skipped”
during scanning, if you like:
19
s
Canning
FT-65R/E Operating Manual
Application for FCC / IC
FCC ID: K6620665X20 / IC: 511B-20665X20