s
et
(M
enu
) M
Ode
The
FT-65R/E
Set Mode, already described in parts of many previous chapters,
is easy to activate and set. It may be used for configuration of a wide variety of
transceiver parameters, some of which have not been detailed previously. Use
the following procedure to activate the Set Mode:
1. Press the
F/W
key, then press the [
0
SET
] key to enter the Set mode.
2. Press [▲] [▼] key to select the Set Mode Item to be adjusted.
3. Press the
F/W
key momentarily to enable adjustment of the Set Mode Item.
4. Press [▲] [▼] key to adjust or select the parameter to be changed on the
Set Mode Item selected in above step.
5. After completing your selection and adjustment, press the
PTT
switch mo-
mentarily to save the new setting and exit to normal operation.
No. ITEM
Function
Values
Default Value
1
APO
Auto power off
OFF/0.5H to 12.0H (Step 0.5H)
OFF
2
ARTS
Setting the ARTS function.
ARTS BEEP function type.
ARTS Polling time (Interval)
BEEP= INRANGE / ALWAYS /
OFF
INT= 25sec / 15sec
ARTS=OFF
INT= 25Sec
3
BATTSAVE
Selects the Receive-mode Battery
Saver interval (“sleep” ratio)
200 mS / 300 mS /500 mS / 1
SEC / 2 SEC / OFF
200mS
4
B-CH.L/O
Busy Channel Lock-Out
B-CH.L/O ON / B-CH.L/O OFF
OFF
5
BEEP
Beep function Enable/Disable
KEY+SC/KEY/OFF
KEY+SC
6
BELL
Select the number of CTCSS/DCS
Bell ringer repetitions.
OFF / 1Time / 3Times/ 5Times /
8Times / CONTINUE
OFF
7
COMPANDER Voice Compander
CMP.ON / CMP.OFF
OFF
8
CTCSS
Setting the CTCSS Frequency TX
and RX
50 CTCSS tones and OFF
TX=OFF
RX=OFF
9
CW ID
CW identifier during ARTS
operation. Transmission every 10
minutes.
TX= ON/ OFF
ID=****** (6cara)
TX= OFF
ID= blank
10 DC VOLT
Indicate Battery DC Voltage.
11 DCS CODE
Setting the DCS CODE TX and
RX
104 DCS CODEs
TX=OFF
RX=OFF
12 DTMF SET
Setting the DTMF autodialer
sending delay time and Speed and
Delay time.
MODE= Manual / Auto
Delay= 50mS / 250mS / 450mS /
750mS / 1000mS
Speed= 50mS / 100mS
M=Manual
D=450mS
S=50mS
13 DTMF WRT
Programing to DTMF autodialer.
14 EDG.BEEP
Enables/Disables the Band-
edge beeper while selecting the
frequency via the [▲] or [▼] key.
BEEP OFF / BEEP ON
BEEP OFF
15 KEY LOCK
Keyboard Lock function
KEY / PTT / P+K
KEY
16 LAMP
Selects the LCD/Keypad Lamp
mode.
5secKEY / 10secKEY / 30secKEY
/ CONT / OFF
5secKEY
17 LED
Selects the active or disable TX/
BUSY LED function.
TX= ON / OFF
BUSY= ON/ OFF
TX=ON
BUSY=ON
18 MEM DEL
Delete Memory Channel mode
Select Delete memory
19 MON/T-CL
Selects the MONI switch function. MONI / T-CALL1750 / T-CALL2100
/ T-CALL1000 / T-CALL1450
MONITOR
20 NAME TAG
Stores Alpha-Numeric “Tags” for
the Memory channels.
-
25
FT-65R/E Operating Manual
Application for FCC / IC
FCC ID: K6620665X20 / IC: 511B-20665X20
