M
isCellaneOus
s
ettings
C
hanging
the
C
hannel
s
teps
The
FT-65R/E
’s synthesizer provides the option of utilizing channel steps of
5/6.25/10/12.5/15/20/25/50/100 kHz per step, as well as an automatic step
selection based on the current operating frequency (“
AUTO
”), any number of
which may be important to your operating requirements. The
FT-65R/E
is set
up at the factory in the “
AUTO
” configuration, which probably is satisfactory for
most operation. However, if you need to change the channel step increments,
the procedure to do so is very easy.
1. Press the
F/W
key, then press the [
0
SET
] key to enter the Set mode.
2. Press the [▲] or [▼] key to select Set Mode Item “
31: STEP
”
.
3. Press the
F/W
key momentarily to enable adjustment of this Item.
4. Press [▲] [▼] key to select the new channel step size.
5. When you have made your selection,press the
PTT
switch to save the new
setting and return to normal operation.
23
FT-65R/E Operating Manual
Application for FCC / IC
FCC ID: K6620665X20 / IC: 511B-20665X20
