Yaesu FT-65 User Manual
3
Repeater Shift + - ARS
FUNCTION KEY (bottom key with 2 lines) for navigating multi-selection menus.
•
Press and hold the FUNCTION key
o
Enters the menu list
o
Backs out of the numbered menu item
•
Press the FUNCTION key
o
Selects an item in the menu list
o
Goes into or out of the menu sub selection
Menu item 24 REPEATER allows you to change all repeater settings on one screen.
ARS : ON, OFF automatic repeater shift
MODE : SIMPLEX, +REP, -REP This is for manual setting of shifts
Mode is ignored if ARS is ON
SHIFT : Set the MHz shift for a repeater. It is a different number depending on
the band you are in.
VHF 0.600M
UHF 5.00M
Squelch Codes
The FT-
65 does allow “split tones” to be set from one menu screen on the radio.
FUNCTION KEY (bottom key with 2 lines) for navigating multi-selection menus.
•
Press and hold the FUNCTION key
o
Enters the menu list
o
Backs out of the numbered menu item
•
Press the FUNCTION key
o
Selects an item in the menu list
o
Goes into or out of the menu sub selection
Bold is most common
8 CTCSS
11 DCS CODE
29 SQL TYPE
CTCSS TONE
DCS CODE
OFF
TX : 100.0Hz
TX : OFF
R-TONE
RX : 100.0Hz
RX : OFF
T-TONE
no RX tone used
TSQL
Both TX &RX used
The settings in menu items 8 and 11 are
REV TN
activated by the setting in menu item 29.
DCS
Use the DCS codes
FUNCTION then P3 accesses menu item 29 SQL TYPE.
PAGER