Yaesu FT-65 User Manual
7
MARS CAP modification to unlock, open TX
This is a software reset on the radio. It does not delete the memories or settings.
With the radio Off. Press and hold the PTT and MONI key (middle key with 1 lines)
Turn on the radio and release the keys
Type 62406665
The radio will restart with extended transmit enabled
Repeat the process to disable extended transmit
Extras
This is a “user” radio that is specialized for Amateur radio operators of all skill levels.
By “user” radio, I mean that its type of operation can be limited so you can put
the
radio
in anyone’s
hands and they can’t mess anything up.
RESET / USER LIMITS / CLONING
With the radio Off. Press and hold the PTT and MONI key (middle key with 1 lines)
Turn on the radio and release the keys
Purpose
Display
Description
Reset
F1: SET RESET
Reset the set (menu) settings to factory defaults.
Reset
F2: MEM RESET
Clear the memory settings to factory default.
Reset
F3: BANK RESET
Clear the memory bank assignments.
Reset
F4: ALL RESET
Clear all memory and other settings to factory default.
User
F5: MEM-ONLY
Operation on Memory mode only.
Using at an event?
User
F6: VHF-ONLY
Operation on the VHF band only.
Antenna restrictions?
User
F7: UHF-ONLY
Operation on the UHF band only.
Antenna restrictions?
User
F8: DUAL DISP
See Dual Display
on next page
Display both VFO-A and VFO-B
on the same screen.
Two-line display in Memory mode.
Or Split band VFO use. RX on one band and TX on another
Cloning
F9: CLONE
Enters clone mode.
For User settings, do the process again to turn it off.
Cons
Has a non-standard speaker/microphone jack. The Yaesu part numbers that work are:
Speaker/Mic SSM-17B and Earpiece/Mic SSM-512B
