9
Load the Film
☆
If you fail to set the film by the instruction on Page 8, try following method.
■
Lift the SAFETY COVER HOOK and open the SAFETY COVER.
■
Insert the film between FEEDING ROLLER and SUPPORTING ROLLER. Then press FWD BUTTON
to load the film. (FEEDING ROLLER can be rotated manually when the POWER SWITCH is off.)
・
Press FWD BUTTON for a while at first, and then press FWD BUTTON longer to load the film.
・
Make sure that the film comes out from the film outlet.
・
If film comes out inclining, press the FWD BUTTON until film comes out straight.
・
FWD BUTTON operates only while pressing the button.
■
Close SAFETY COVER and lock SAFETY COVER HOOK.
■
Make sure that the film is set properly.
■
Press the START BUTTON.
・
By pressing the START BUTTON after loading film by FWD BUTTON, the cutting blade starts operation
to cut the film.
・
Remove the film.
Load the film
Confirm the setting
Cut the film
Remove the film
Make sure that there is no foreign material on the machine.
Leaving foreign material on the machine may cause malfunction
of the machine.
