12
Present cutting quantity can be memorized.
■
Press AUTO/MANUAL BUTTON longer and display present cutting quantity.
■
Press
＋
BUTTON.
・
Present cutting quantity will be forwarded and memorized.
・
The data transferred is not deleted even if switching off.
■
If pressing AUTO/MANUAL BUTTON longer, display the cutting length.
■
Press AUTO/MANUAL BUTTON longer and display present cutting quantity.
■
The number will be ZERO if pressing
−
BUTTON.
■
Display will change to cutting length if pressing AUTO/MANUAL BUTTON
longer.
PRESS LONGER
PRESS LONGER
■
Please clean up with a piece of cloth dipped in the detergent.
■
Keep clean for the path of film.
・
Make sure whether there is no waste of film or foreign material on R
oller
and Blade.
■
Basically, blade replacement should be done by manufacturer.
・
Please do not disassemble by yourself. We may not accept repair and parts
replacement if you do disassemble.
■
Use food grade lubricant on contact points of both upper and lower blades
as shown on the right image. (FD-160
Ⅲ
, FD-200
Ⅲ
)
TORQUE LIMITER is equipped in BRAKE ROLLER to make stable with film loading.
Depends on the usage, torque setting needs to be adjusted.
■
If the torque is weak, it will cause film slack, curved film loading, and film jammed.
・
Hold BRAKE ROLLER and turn ADJUST DIAL to make it stronger following to below figure.
■
If the torque is strong, it may cause shorter cutting piece than setting, or failure for film feeding.
・
If the torque is strong, turn ADJUST DIAL to make it weaker following to below figure.
■
When you adjust the torque, remember the original position of ADJUST DIAL.
Then find the suitable torque position by turning it 1/4 rotation each time.
Memo Function
Reset the Number of Cutting pieces to ZERO
Maintenance
Adjust Torque of Brake Roller (FD-160
Ⅲ
)
Normal Position
SCALE MARK
ADJUST DIAL
TORQUE LIMITER
BRAKE ROLLER
Hold
Loose
Tight
