Yaesu Contest, Operation Manual

Page: 14 / 54

FT
DX
9000MP/C
ONTEST
D
ATA
M
ANAGEMENT
O
PERATION
M
ANUAL
Page 12
H
OW TO
U
SE THE
W
ORLD
C
LOCK
M
ISCELLANEOUS
W
ORLD
C
LOCK
S
ETUP
O
PTIONS
It is possible to change the order of selection of the city times, as well as the display color, etc.
1. On the World Map Screen, press the [ 4/7
](
LIST
)
key to select the “City Name List” screen.
2 . If you want to change the order of the city times
as indicated at the middle of the Display screen,
press the [
1/1.8
]( ) or [
2/3.5
]( ) keys to move
the cursor to the city name you want to change
the position of. When the [
6/14
](
DOWN
) key is
pressed, the position goes downward. If you need
to move it further, repeat as necessary.
3. If you want to change other settings of a city, se-
lect the city name by pressing the [
1/1.8 ]( ) or
[ 2/3.5 ]( ) keys to highlight the city, then press
the [ 7/18
](
SELECT
) key momentarily. Now the
screen will change to the city setup screen, where
the following settings can be done: DAYLIGHT
SAVING TIME (to select Summer time), DISPLAY
MAP (display or not display city names on the
World Clock screen), and HIGHLIGHT (select
yellow or white highlighting indication for cities).
4. If you want to delete a city from the World Clock
screen, move the cursor to the city name by press-
ing the [
1/1.8
]( ) or [
2/3.5
]( ) keys , then press
the [ 4/7
](
DEL
) key.
5. When finished, press and hold in [ 7/18
](
SELECT
)
for 2 seconds to exit.
Advice : On the DISPLAY MAP setting, if the city
name indication is selected, the city name will be dis-
played on the World Map. When “NO” is selected,
the city name will not be displayed, and only the city
name and the current time is indicated at the middle
of the Display screen.
For the HIGHLIGHT setting (city name: highlighted
or not highlighted), if “Highlight” (YES) is selected,
the city name on the world map will be shown in yel-
low font color.
If “NOT Highlighted” (NO) is selected, the city name
will be indicated in white.
“LIST” Select
“DELETE” Key “SELECT” Keys