•
Operating Mode
Select the operating mode for receive channel.
FM:
The selected frequency band is set to FM mode.
AM:
The selected frequency band is set to AM mode.
•
DIG/ANALOG
The AMS, V/D mode (DN), the Voice FR mode (VW) and the ANALOG mode (FM/AM mode) are select
-
able.
When the Setup Menu [TX/RX]
[2 DIGITAL]
[5 DIGITAL VW] is set to “ON”, the Voice FR mode
(VW) can be selected.
• Name
Enter the desired memory name (up to 16 digits).
• Tone Mode
This item selects the Audio Squelch Code type.
• CTCSS Frequency
This item selects the Tone Frequency of the Tone Squelch.
• DCS Code
Select the DCS code when DCS is set.
• User CTCSS
Select the idle line frequency to remove signals such as idle line signals used by private railways and con-
trol signals of MCA radio system.
• RX DG-ID
Select the receiving DG-ID number.
• TX DG-ID
Select the transmitting DG-ID number
•
Tx Power
This item selects the TX Power.
• Step
Sets the channel step for receiving channels.
•
Narrow
By ticking the checkbox of this item, switches to the Narrow FM mode.
•
Clock Shift
When an internal spurious signal occurs due to the microcomputer clock, turn this setting on (tick the
checkbox). This may improve the situation.
Usually, this item is set to “OFF” (un-tick the checkbox).
• Comment
Comments may be added to the registered memory channels. Up to 255 letters can be used. This function
is useful in organizing the memory channels by, for example, applying a category name to each channel.
These comments are not transferred to the FTM-300DR/DE.
23
