26
Note:
sometimes you may need a switch to control on/off of
the RTS sensor (see the “packing list-page2”).
1) Drill a hole on your bait boat housing, tighten the switch on
the bait boat.
2) Connect the switch to the power cable.
3) Spread some sealed glue to the drilled location, preventing water
leakage from happening.
conect to
power cable
hull of
bait boat
26
Note:
sometimes you may need a switch to control on/off of
the RTS sensor (see the “packing list-page2”).
1) Drill a hole on your bait boat housing, tighten the switch on
the bait boat.
2) Connect the switch to the power cable.
3) Spread some sealed glue to the drilled location, preventing water
leakage from happening.
conect to
power cable
hull of
bait boat
26
Note:
sometimes you may need a switch to control on/off of
the RTS sensor (see the “packing list-page2”).
1) Drill a hole on your bait boat housing, tighten the switch on
the bait boat.
2) Connect the switch to the power cable.
3) Spread some sealed glue to the drilled location, preventing water
leakage from happening.
conect to
power cable
hull of
bait boat
