manualshive.com logo in svg

Yachting FC500, Operation Manual

The Yachting FC500 is a top-of-the-line marine navigation device for yacht enthusiasts. Ensure seamless operation with the free Operation Manual available for download on our website. Get your hands on the manual and unlock all the features of the Yachting FC500 at manualshive.com.

Share
Download
background image

20

4. Mount the wireless sensor on the supporting 
plate, as instructed below 

a) drill three holes on the supporting plate.
- Diameter of hole-1 is about 12.5mm
- Diameter of hole-2 and hole-3 is about 3.5mm

Note: 

use a pencil to mark the position before drilling the hole

-2 and hole-3. 

screw

20

4. Mount the wireless sensor on the supporting 
plate, as instructed below 

a) drill three holes on the supporting plate.
- Diameter of hole-1 is about 12.5mm
- Diameter of hole-2 and hole-3 is about 3.5mm

Note: 

use a pencil to mark the position before drilling the hole

-2 and hole-3. 

screw

20

4. Mount the wireless sensor on the supporting 
plate, as instructed below 

a) drill three holes on the supporting plate.
- Diameter of hole-1 is about 12.5mm
- Diameter of hole-2 and hole-3 is about 3.5mm

Note: 

use a pencil to mark the position before drilling the hole

-2 and hole-3. 

screw

Summary of Contents for FC500









































































Reviews:

No comments

Related manuals for FC500

JRC JFV-700HP Instruction Manual preview
JFV-700HP
Brand: JRC Pages: 89

Brands by name

Popular brands

Load more brands