Yaber V2, Instruction Manual

Page: 10 / 140

FAQ
1. At the time of switching on, the indicative light does not work
①
. The power supply may not be well connected
②
. Check the overheating protection system
2. Pressing the power button on the remote control does not turn on the
projector
①
. The remote control batteries are empty
②
. The signal between the remote control and the IR sensor is obstructed
③
. Strong direct light on the IR sensor?
3. No image on the screen
①
. Is the channel setting correct?
②
. Is there an input signal?
③
. Is the input cable inserted correctly or is it in the wrong position?
④
. In PC mode the refresh rate is> 75KHz?
4. The image works but there is no sound
①
. Are the input cables connected correctly?
②
. Volume at minimum or silent
③
. Check that the audio format of the video is in the supported list
5. Turns off automatically after being turned on for a while
①
. Is there a barrier around the fan?
②
. Small or large voltage fluctuations
③
. Check the overheating protection system
6. I can not find devices connected with hard drives or flash drives
①
. Re-insert the device
②
. Check if the device is working
7. Unable to play video
①
. Is the video format correct?
②
. The file is corrupted?
③
. The device is damaged
support01@yaberauto.com
EN 06