Yaber V2, Instruction Manual

Page: 9 / 140

Please Attention:
The Mirror display function doesn't support protected videos due to
copyright protection. (Netflix, Amazon Prime Video and Hulu etc.)
Important safeguards
These safety instructions are to ensure the long life of the projector and
to prevent fires and shocks. Read them carefully and pay attention to all
warnings.
Installation
1. For best results, use the projector in a dark room.
2. Place the projector on a flat, level surface in a dry area away from dust
and moisture.
4. Exposure to direct sunlight, smoke or steam may damage internal
components.
5. Handle the projector carefully. Falling or shaking can damage internal
components.
6. Do not place heavy objects on top of the projector.
1. The projector is designed to operate with a 110-240 V ~ 50/60 Hz AC
adapter. Ensure that the power supply meets this requirement before
attempting to use the projector.
2. Handle the power cord carefully and avoid bending it too much. A
damaged cord can cause electric shock or fire.
3. If the projector will not be used for a long time, unplug the power cord
from the outlet.
Supply
1. Unplug the projector before cleaning it.
2. Periodically clean the cabinet with a damp cloth. If it is very dirty, use a
mild detergent. Never use strong detergents or solvents such as alcohol
or thinners.
3. Use a blower or lens paper to clean the lens and be careful not to
scratch or damage the lens.
Cleaning
support01@yaberauto.com
EN 05