5
6
WARNING
ATTENTION
Must Comply
Must Comply
Must Comply
Prohibition
Prohibition
Pressing the device stronger than
necessary or using it intensively on a
single area may damage the skin.
Do not press the device strongly or
use it intensively on a single area.
Failure to comply may cause
accidents or injuries.
Do not use while driving.
Prohibition
Failure to comply may cause the
electrodes to stick to the skin and
damage the skin.
Do not use at a temperature below
the specified ambient temperature.
Prohibition
Failure to comply may cause
damages to your eyes or skin.
Do not look directly into the LED
light. When using the LED light to
treat upper eyelids, lower eyelids,
and outer corner of the eye, be
sure to close your eyes and keep
an electrode head at least 5 cm
away from the skin.
You may feel strong irritation or
discomfort by EMS on your cheeks
or chin. If you feel strong discomfort,
consult a physician.
If you are currently undergoing
dental treatment or have teeth
fillings, choose a lower intensity
level and apply the device on a
different area,
Failure to comply may lead to
accidents.
If a power failure occurs, turn off
the power immediately and unplug
the device from the power outlet.
Make only gradual adjustments to
the intensity level. Failure to comply
may cause accidents or injuries.
Use only Level 1 upon the first use
and until you are accustomed to
use. Even if you do not feel any
stimulation, make only small
adjustments to the intensity level.
Use the device at an intensity level
that suits you.
Failure to comply may lead to
accidents due to malfunctions.
Do not allow the device to come
into contact with another beauty
device or electronic appliance while
the power is on. Do not use with
other electronic products (electric
blankets/bed sheets, heated tables,
etc.) at the same time.
Prohibition
If the mode is used for continuous
treatments, an electrode head of the
device will not become fully cool.
Have an interval of at least 30
minutes between treatments.
Do not use COOL Mode
continuously.
Stop using the device immediately if
the treatment does not agree with
your skin. If symptoms persist the
following day and beyond, consult a
physician.
Check carefully that your skin is
not showing any abnormality
during the treatment. Stop using
the device immediately if you start
to feel pain, fatigue or if you see
any skin reaction during use.
Do not use the device
continuously for an overly long
period, such as for a commercial
use.
Must Comply
When using on the same area
again, be sure to leave an interval of
24 or more hours between
treatments. Excessive use may
damage the skin. The above
recommendations are guidelines
only; please observe your skin
condition and use the device
accordingly.
Avoid using the device on the same
area for longer than 14 minutes.
Prohibition
Removing
the plug
Failure to comply may cause a fire, electric shock or failure of the device.
Use at AC100~240V only to avoid a potential fire or electrical shock hazard.
Must Comply
Failure to comply may cause a generation of heat, fire or malfunction of the device.
Be sure to check the plug configuration and the voltage of the power outlet before use.
Combustion
warning
The plug configuration and voltage may vary depending on the region and the type of accommodation.
Always be sure to check for compatibility before using the device.
For information about plug adapters, consult a travel agency or a consumer electronics retailer.
Use in Foreign Countries
Use in F
or
eign Countries
Safety P
recautions
