background image

17

18

You cannot feel any 
vibration.

Vibrations are turned off.

Press the Vibration (VIB) 
button to switch on the 
vibration function.

EYE Mode does not 
function.

The electrode head is not in 
the correct position.

EYE Mode will not function 

unless the EYE Mode 

electrodes are properly rotated 

180°. Rotate the electrodes so 

that they are in the correct 

position (page 11).

The EYE Mode electrodes 
are not touching the skin.

Please make sure both of the 
two EYE Mode electrodes 
are touching the skin at the 
same time (see page 16).

COOL Mode is not very cool.

The device is being used in 
an environment with a 
temperature exceeding the 
recommended range.

Try using in an environment 
with the temperature 
between 15°C and 30°C.

COOL Mode was used 
continuously.

Turn off the device and wait 
at least for 30 minutes 
before restarting to use.

The outside of the electrode 
head will not cool down.

Only the inner electrode 
head becomes cool.

Troubleshooting

After T

reatment

Checklist for Possible Problems

Problems

Possible Causes

Solutions

The device does not turn on.

Turn on the power by 
connecting the AC adapter.

The AC adapter is not 
plugged into the wall socket.

Plug adapter into the device.

The adapter is not plugged 
into the device.

Troubleshooting

To keep the product clean, please be sure to clean it after each use.

1

Disconnect the AC adapter from the main unit and the wall outlet.

2

To clean the device and electrode head, wipe them with a damp and 
well-wrung cloth to remove any dirt. Wash the cotton stopper with water 
after removing it from the main unit.

• Refrain from using an alkali cleaning agent, alcohol, thinner, benzene, nail polish remover or any 

other solvents.

• Do not leave the device with lotion or gel on it.

3

Wipe the entire device with a dry cloth and store it after removing all 
moisture.

After Treatment

The device is too warm.

The device was used 
continuously.

Turn off the device and wait 
at least for 1 hour before 
restarting to use.

Storage

 If you will not be using it for an extended period, clean the device before storing it.

 When the device is not in use, disconnect the AC adapter from the main unit and wall outlet.

 Avoid storing the device near a heater or in a bathroom or other high-temperature/high-humidity 

locations. Also, avoid locations where there is an exposure to direct sunlight or unstable.

 Keep the device out of the reach of children.

Maintenance and Inspections

 If you will not use the device for an extended period, be sure to inspect it carefully and check that the device 

works properly and safely before restarting use.

 If the device is malfunctioning, go to ‘Checklist for Possible Problems’ (pages 18-19) and attempt to identify 

the problem before arranging to have the device repaired. If the problem persists, contact your local 
distributor with a proof of purchase.

 If the device malfunctions or appears damaged, please contact your local distributor.

How To Clean

Summary of Contents for M30













Reviews: