July 2016
P 5
da Vinci
Jr.2.0 Mix
Note: Please follow these steps and ensure that the guide tube and extruder are properly
installed before starating the "LOAD FILAMENT" function. Failure to install the guide tube will
disrupt filament feed.
Reminder: When installing the filament guide tubes, please attach
them in an intersecting way as shown below. Turn on the power once
the installation process is complete.
Installing the Accessories
Install the Filament Guide Tube and Extruder
Feed
module 1
Feed
module 2
1
Connect the filament guide tube to the extruder
Insert the guide tube into feed module 1 and 2.
Make sure it goes all the way down, as shown in the
the illustration.
2
3
Install the extruder
Align the extruder with the bracket and press the
extruder to attach it to the socket.
4
Insert the filament guide tube into the feed module tube
port and finish two sides installation.
Take the flat cable out from the right side of the
printer and connect it to the extruder.
