background image

 

temperature rises). 

 key once to finish the temperature correction and the unit 

automatically backup mode. The user may continue set other modes or back from 
the current setting mode.     

 

Example for temperature correction: The current set temperature value is 200

,   

however, the actual temperature is only 190

. So it needs to correct by +10

Correction method: if the current correction value is 00 or -00; then change it to 
10. If the current correction value is -20, then change it to -10. If the current 
correction value is 20, then change it to 30. 

 
5.

 

Sleep Mode Set   

 

-

 and flashes, the unit 

enters the Sleep mode status. At this moment, the LED displays the pre-set value. 

 or 

 key to change the set value. If set value reads 

the unit set in  Sleep  mode releasing status. If the display read 
the unit set in  Sleep  mode. 

 key once to finish the sleep mode 

setting, then the unit automatically backup. The user may continue set other 
modes or back from current set mode.   

Please note the manufacturer original design will keep in  Free  status without 
setting  Sleep  mode. 

 

6.

 

Wake-up method   

 

Temperature Down Suspend: If the unit set in Sleep mode function, after 20min   
idleness, the system will enter the sleep mode automatically, the temperature will 
go down to 200

  and the LED displays at   200  and flashes

Activating the 

solder wand will disengage the suspend status and the unit will immediately ramp 
up to the preset temperature. There are three methods of wake-up the Temperature 
Down Suspend. 

a. Pick up the solder wand.   
b. Press any key of the unit.   
c. Turn off the main switch and restart. 

 

 

Power off Suspend: If the unit enters the Sleep mode over 40min without wake-up, 
the unit will enter automatically the power off suspend status. It means the heater 
power will be cut off and the LED displays 

 

 

 and flashes. The only way 

to awake the power cut off mode is to switch off the main power and re 

                 

                                     

 

 

 

Summary of Contents for LF-2000










Reviews: