background image

 

 
IMPORTANT: The temperature above 410

 (770

) is not recommended for 

normal soldering functions, but can be used for short periods of time when high 
temperatures are required. Please note that the lead free solder alloys require a higher 
soldering temperature which shortens tip life. 
                                     

  OPERATING INSTRUCTIONS 

 Ensure that the working voltage matches your power supply before beginning use. 
 Check carefully for any damage during transportation. 
 This unit contains: 

    1. Solder wand. 
    2. Iron holder with brass tip cleaner. 
    3. AC power cord with plug. 
 

OPERATING PROCEDURES: 
1.

 

 

2.

 

-

 

3.

 

Turn 

 position.     

4.

 

Press the 

 key up until the temperature to 250

 (482

). Then tin the surface 

of the tip by applying a new covering of solder after being warmed to protect tip 
and extend its life. 

5.

 

When the temperature reaches to the desired temperature that the heating indicator 
light will be flashed on and off to maintain the set temperature. The unit now is 
ready for use.   
 

        CAUTIONS:     

REMEMBER, THE TIP IS HOT! 
-

 

The tip and barrel of the solder wand will cause serious burns if they are allowed 
to contact skin. Always return the solder wand to the safety holder after each use. 

DO NOT WORK ON LIVE CIRCUITS 
-

 

Before working on any mains powered equipment, make sure that it is turned off, 
and the mains plug is removed from the power point.   

DO NOT USE IF DAMAGED 
-

 

If the power lead becomes damaged or the soldering station becomes faulty, 
discontinue use immediately. To comply with safety standards, the power lead 
must only be replaced by authorized technicians as special purpose tools are 
required.   

Caution: Soldering irons operate at high temperatures and can easily burn 

people or objects. Do not touch the tip and heater at any time and keep it a safe 

distance from flammable materials 

Please allow a sufficient time for it to cool before changing tips or servicing the 

unit! 

Summary of Contents for LF-2000










Reviews: