6
TEMPERATURE SETTING: (No password set)
1.
Increase temperature: By pressing
key one time, the digital will be increase
key over 2 seconds then the digital numerals will be
forwarded counting continuously till the temperature up to what you desire to set.
2.
Decrease temperature: By pressing
key, the same procedure as above.
PARAMETER SETTING:
1.
Press SET key and hold for at least 4 seconds until display shown
sign then release the
key. The sign
starts to flash and reminding
(fixed). If the user inputs the same
unit will enter the modes selection procedure, otherwise,
the unit will be back from the current mode automatically.
2.
After the unit enters the Modes s
-
Press
or
key
within 15 s
key one time, then the unit will be mmediately
back from the Parameter Set status.
For example: F-
-
-
F-3
3.
Password Setting:
-
key one time and the unit
enters the Password Set status. At this moment, the LED displays the pre-set value.
or
key to change pa
means the unit will be under the status
en
means the unit will be under the password status.
key once to finish
password setting and the unit will backup mode, the user can continue set other
modes or back from the setting mode.
4.
Temperature Correction Setting
-
and flashes that the unit
enters the Temperature Correction Mode. At this moment, the LED displays preset
correction value.
A: Operation of Centigrade temperature correction:
or
key to change the temperature correction value. The first
means
plus (actual temperature is up).
B: Operation of Fahrenheit temperature correction value:
Press
or
key to change the temperature correction value. When
the numbers is sparkling on LED displays, it means minus value (actual
temperature falls), when the numbers stop sparkling, it means plus value (actual
