RS-1600-FC-FFX2 User Guide
xii
Revision History
Version
Date
Description of Change
1.0
January 25, 2002
Initial Release
2.0
October 29, 2002
The following illustrations revised to show new LRC I/O Module fascia:
Figures 1-3. 1-8, 1-9, 1-10, 1-11, 2-1, 2-‘4, 4-10, 4-11
Figures 2-14, 4-10 and 4-11 revised to show power cords in situ.
Preface
Safety section, pages viii to x, rewritten to include:
• Illustrations of Safety Labels used on the Enclosure system.
• The following additional safety statements:
– “Do not lift the RS-1600-FC-FFX2 by the handles on the PSU/
Cooling module, they are not designed to support the weight of
the populated enclosure.”
– “The equipment is intended to operate with two working PSUs.”
• Warning added:
Warning
Do not remove covers from the PSU. Danger of
electric shock inside. Return the PSU to your
supplier for repair.
Battery Safety, page x: section rewritten, Warning inserted, as follows:
Warning
The battery is not user replaceable. there is a
danger of explosion if the battery is incorrectly
replaced. The battery should only be replaced
by trained service personnel. Please refer to
section
4.8.5, ”Battery Replacement”, on
page 57
.
• Dispose of used batteries in accordance with the manufacturer’s
instructions and National regulations.
Rack System Precautions, page x: bullet point 10: “The battery is not
user replaceable and should only be disconnected by the manufacturer.”
Deleted
Special Tools and Equipment, page xi:
• “Cross headed screwdriver for battery removal”. Inserted
Chapter 1
Figure 1-4 revised to show current Tower design.
Section 1.3.2.1, note added:
Important
“The FFX2 enclosure ID must always be set to
select ID1.”
Table 1-1, switch number 3, column 3 changed from “Off” to “On”
