UV 70x IQ SAC
Commissioning
15
ba77046e02
05/2017
Connecting the
sensor to the sensor
connection cable
Fig. 3-5 Connect the sensor
1.
Take the protective caps off the plug connections of the sensor and the
SACIQ (SW) sensor connection cable and keep them safe.
2.
Plug the socket of the SACIQ (SW) sensor connection cable onto the
plug head connector of the sensor. At the same time, rotate the socket
so that the pin in the plug head connector (1) clicks into one of the two
holes in the socket.
3.
Then screw the coupling ring (2) of the sensor connection cable onto
the sensor up to the stop.
SACIQ (SW)
1
2
