Xylem WTW Oxi 3310, Operating Manual

Page: 19 / 64

Oxi 3310 Operation
19 ba75804e08 10/2017
4.2.2 Navigation
Measured value display In the measured value display, you can

Open the menu for calibration and measurement settings with <F1>
(short keystroke)

Open the Storage & config menu with the sensor-independent set-
tings with <F1
_
> (long keystroke (approx. 2 s).

Change the display in the measurement window by pressing <M>
(e.g. D.O. concentration
−>
D.O. saturation index
−>
D.O. partial
pressure
−>
).
Menus and dialogs The menus for settings and dialogs in procedures contain further sub-
elements. The selection is made with the
<

><

> keys. The current
selection is displayed with a frame.

Submenus
The name of the submenu is displayed at the upper edge of the
frame. Submenus are opened by confirming with
<ENTER> . Exam-
ple:

Settings
Settings are indicated by a colon. The current setting is displayed on
the right-hand side. The setting mode is opened with
<ENTER> .
Subsequently, the setting can be changed with <

><

> and
<ENTER> . Example:
General
Interface
Clock
Service information
Reset
System
15.03.2014
08:00
Back
Language: Deutsch
Beep
:
Off
Illumination
:
On
Contrast
:
48 %
Switchoff time
:
30 min
General
15.03.2014
08:00
Back