pHix® Compact V3. NG (next generation)
EN 4.10 Version 2103
1
http://www.mjk.com
Introduction /Measurements and standards used
7
1.
2.
3.
Introduction
Thank you for choosing a pHix® Compact pH / Redox transmitter. We have
done everything possible to make a pH / Redox transmitter that can fulfill all
your demands.
pHix® Compact is very simple to install and connect, as electrode, fitting and
transmitter is built together in the same NEMA 6X / IP 68 class enclosure. By
doing so, all error sources like e.g. bad cable connections and leaking fittings
are eliminated.
As pHix® Compact is equipped with an union flange in one end and male
thread in the other, the transmitter is very easily mounted in open tanks as well
as pipes.
You can always contact your representative or the MJK Service Hotline for
advice and guidance. Also, take a look at
pHix® Compact is registered trademark of MJK.
Measurements and standards used
This manual uses both the US standard measurement system (inches),
Fahrenheit and North American industry standards and the metric
measurement system, Celsius and European industry standards and side by
side.
Safety instructions
Read this manual carefully.
Be aware of the environment on the installation site. Wear necessary
protective equipment and follow all current safety regulations.
pHix® Compact can provide a start signal for dangerous machinery.
Always ensure that connected machinery and other equipment are
effectively being put out of service (i.e. removal of main fuses, lock main-
and/or security switches in off position) before commencing setting, fault
finding, service and maintenance work etc.
Summary of Contents for MJK pHix Compact V3
Page 1: ...Manual EN 4 10 Version 2103 pHix Compact V3 NG NEXT GENERATION...
Page 2: ...pHix Compact V3 NG next generation EN 4 10 Version 2103 2 Your notes...
Page 15: ...pHix Compact V3 NG next generation EN 4 10 Version 2103 Mounting Mechanical mounting 15...
