Xylem LOWARA e-SV Series, Installation, Operation And Maintenance Manual

Page: 8 / 48

en - Original instructions
8 e-SV series - Installation, Operation and Maintenance Manual
In both cases, promptly contact Xylem or the Authorised Distributor from whom the product
was purchased.
Unpacking and inspection of the unit
CAUTION: Cut and abrasion hazard
Always wear personal protective equipment.
1. Remove packing materials from the product.
2. Release the unit by removing the screws and/or cutting the straps, if fitted.
3. Check the unit for integrity and to make sure that there are no missing components.
4. In case of damage or missing components, promptly contact Xylem or the Authorised
Distributor.
2.3 Unit handling
The unit must be harnessed and lifted as shown in the figure.
Figure 2: Lifting of the unit
Type of harness Motor power, kW
1 < 5,5
2
≥ 5.5
WARNING:
Use cranes, ropes, lifting straps, hooks and clasps that comply with current regulations and
that are suitable for the specific use.
NOTICE:
Make sure that the harnessing does not hit and/or damage the unit
E
S
V
_M
00
01
_A
_o
t
1
2