en – Original instructions
e-IXPSA – Additional Installation, Operation and Maintenance Manual
45
• Pump:
EN 1127-1:2019, EN 15198: 2007, EN ISO 80079-36:2016,
EN ISO 80079-37:2016.
Motor:
refer to electric motor manufacturer’s declaration of conformity
included in the supply
• Refer to the declaration of conformity of the electric motor manufacturer included in the
supply.
• EN IEC 63000:2018.
7.
Notified body:
ATEX
Pump: technical documentation (file name IXP ATEX rev. 0 of
18.01. 2022) deposited at Intertek Italia S.p.A. (NB 2575).
Motor: refer to the electric motor manufacturer’s declaration of
conformity included in the supply.
8.
Additional information:
ATEX
The following specific conditions of use apply.
– The equipment must be suitably grounded (earthed) prior to
operation.
– It is the user’s responsibility to ensure the equipment does not
run dry. Any control system used to achieve this must comply
with the relevant requirements of EN 80079-37.
– The equipment may only be operated when it is filled with the
liquid to be pumped.
– The liquid to be pumped must have conductivity >1000 pS/m
(CLC/TR 60079–32–1:2018).
– Maximum temperature of the pumped liquid: refer to
paragraphs 1.4.1 and 8.2 of this manual.
RoHS
Annex III – Applications exempted from the restrictions: lead as a
binding element in steel, aluminium, copper alloys [6(a), 6(b), 6(c)].
Signed for and on behalf of:
Xylem Service Italia S.r.l
Montecchio Maggiore, 17.02.2022
Marco Ferretti
Chairman of the Board of Directors
rev.00
Lowara is a trademark of Xylem Inc. or one of its subsidiaries.
