Xylem FLYGT Concertor, Installation, Operation And Maintenance Manual

Page: 21 / 60

4.3.2 Install the pump: P-installation
WS009779B
P Semipermanent, wet well arrangement with the pump installed on two guide bars. The
connection to the discharge is automatic.
1. Install the sliding bracket unit on the pump.
For more information, see the separate accessories documentation.
2. Attach a permanent lifting device to the pump. For example, use a stainless steel lifting
chain with shackles.
3. Lower the pump along the guide bars.
4. Attach the permanent lifting device to the sump structure.
5. Secure the motor cable.
Make sure that the cable cannot be sucked into the pump inlet and that it is not sharply
bent or pinched.
6. Connect the motor cable according to the separate instructions.
Clean all the debris from the sump before the pump is started.
4 Mechanical Installation
6020.180/090 Installation, Operation, and Maintenance Manual 19