Xycom XVME-654 Manual Download Page 54

Page: 54 / 98

Chapter 4 – Programming

4-3

Technical Note

Serial and parallel port addresses are controlled in the BIOS Setup Menu. Changing
the setting will change the I/O location.

IRQ Map

Table Chapter 4 -3 describes the AT-bus IRQ map.

Table Chapter 4 -3. AT-bus IRQ Map

Interrupt

Description

IRQ0

System timer tick

IRQ1

Keyboard

IRQ2

Reserved

IRQ3

COM2

IRQ4

COM1

IRQ5

Available

IRQ6

Floppy drive

IRQ7

Parallel port

IRQ8

Real-time clock

IRQ9

Cascade

IRQ10

Abort switch

IRQ11

Available

IRQ12

Available

IRQ13

Reserved (387)

IRQ14

Fixed disk

IRQ15

Available

Technical Note

COM1, COM2, and parallel port IRQs are available if software does not use the ports
or does not use the interrupt.

Technical Note

PCI IRQs need to be mapped to an AT-bus IRQ. This is done through the BIOS setup.
Refer to Chapter 3 for more information.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for XVME-654



































































































Search results

Summary of Contents for XVME-654

Reviews:

Brands by name

Popular brands

Xycom XVME-654, Manual

Search results

Summary of Contents for XVME-654

Reviews:

Brands by name

Popular brands