Xycom XVME-654, Manual

Page: 36 / 98

Chapter 3 – BIOS Setup Menus
3-9
Numlock Sub-menu
PhoenixBIOS Setup–Copyright 1985-95 Phoenix Technologies Ltd.
Main
Keyboard Features
Item Specific Help
Numlock: [Auto] If the line item you
Key Click: [Disabled] are viewing has
Keyboard auto-repeat rate: [30/sec] specific help, it will
Keyboard auto-repeat delay: [½ sec] be listed here.
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select » Sub-Menu F10 Previous Values
Figure Chapter 3 -5. Numlock Sub-menu
Table Chapter 3 -4 describes the Numlock Sub-menu options.
Table Chapter 3 -4. Numlock Sub-menu Options
Option Description
Numlock Determines how the BIOS defines the numlock key at power up or soft
reset. Normally, the BIOS sets the numlock (numeric keys selected) if it
detects a 101- or 102-key keyboard at power up. If an 84-key keyboard is
detected, numlock is turned off (cursor keys selected). Select “Auto” to
keep this state; “On” to select the numeric keys, regardless of keyboard;
or ”Off” to select the cursor keys, regardless of keyboard. The default is
Auto.
Keyboard click Provides audible key-press feedback by causing the BIOS to click through
the system speaker every time a key is pressed, if enabled. This option is
only valid for systems with a speaker connected to the speaker jack. The
default is disabled.
Keyboard auto-repeat rate Defines the rate at which the keyboard repeats while a key is pressed.
The higher the number, the faster the key repeats. The default is 30 times
per second.
Keyboard auto-repeat delay Sets the delay time after a key is held down, before it begins to repeat the
keystroke. The default is a ½ second.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com