Xycom XVME-654, Manual

Page: 29 / 98

Chapter 3 – BIOS Setup Menus
3-2
BIOS Main Setup Menu
Follow the instructions below to start the BIOS Setup utility.
•
If the setup prompt is disabled on your system–which is the default–press
F
2 after
the memory tests and before your system loads the operating system to access the
main menu.
•
If the setup prompt is enabled on your system, the BIOS displays the following
message:
“Press F2 to enter Setup.”
Once this message appears, press
F
2 to access the main menu.
PhoenixBIOS Setup–Copyright 1985-95 Phoenix Technologies Ltd.
Main Advanced Security VMEbus Exit
Item Specific Help
System Time: [16:19:20]
System Date: [03/02/95]
Diskette A: [1.44 MB, 3½” ] If the line item you
Diskette B: [Not Installed] are viewing has
»IDE Adapter 0 Master (C: 260 Mb) specific help, it will
»IDE Adapter 0 Slave (D:105 Mb) be listed here.
Video System: [EGA/VGA]
»Memory Shadow
»Boot sequence: [C: then A:]
»Numlock: [Auto]
System Memory: 640 KB
Extended Memory: 7 MB
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select » Sub-Menu F10 Previous Values
Figure Chapter 3 -1. Main Setup Menu
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com