4115T Light Duty Industrial PC Chapter 3 – POS-478 CPU Control Board and BIOS Setup
42 143926(A)
Table 3-7. Power Management Setup Options
Item
Description
Power Type Select
This feature is switch of Power Type function.
Configuration options: [AT] [ATX]
PCI / Plug and Play Setup
Figure 3-7. PCI/Plug and Play Setup
Table 3-8. PCI/Plug and Play Setup Options
Item
Description
Clear NVRAM
When this option is set to Yes, system can auto
clear NVRAM. The settings are Yes or No.
PCI Latency Timer (PCI Clocks)
This option specifies the latency timings (in PCI
clocks) for PCI devices installed in the PCI
expansion slots. The settings are 32, 64, 96,
128, 160, 192, 224, or 248.
Init. Graphics Adapter Priority
This setting is to select primary graphic by PCI or
AGP Adapter.
Allocate IRQ to PCI VGA
Set this option to Yes to allocate an IRQ to the
VGA device on the PCI bus. The settings are
Yes or No.
OffBoard PCI IDE Card
This question is needed for off-board non-
compliant PCI IDE card. If present, BIOS needs
to know which slot it is in and how the IRQ is
used by the card.
OffBoard PCI IDE Primary IRQ
This option specifies the PCI interrupt used by the
primary IDE channel on the offboard PCI IDE
controller. The settings are Disabled, Hardwired,
INTA, INTB, INTC, or INTD.
OffBoard PCI IDE Secondary IRQ
This option specifies the PCI interrupt used by the
secondary IDE channel on the offboard PCI IDE
controller. The settings are Disabled, Hardwired,
INTA, INTB, INTC, or INTD.
PCI Slot1 / Slot2 / Slot3 / Slot4 IRQ The option specifies the IRQ priority for PCI