69
142214 (F)
APPENDIX D – AIM3 CONTROLLER JUMPERS
Table D - 1 shows the position and function of the controller jumpers.
Table D - 1. Controller Jumpers
Jumper Position Function
JP1
JP2
JP3
JP4
Not used – Not stuffed
JP6
1-2
2-3
Provide ground return for +12V/+5V on COM2 connector
Do not provide ground return for +12V/+5V on COM2 connector
JP7
1-2
2-3
Allow high side alarm function on COM2 connector
Do not allow high side alarm function on COM2 connector
JP8
1-2
2-3
Allow low side alarm function on COM2 connector
Do not allow low side alarm function on COM2 connector
JP9
1-2
2-3
12V to COM2 connector
Do not 12V to COM2 connector
JP10
1-2
2-3
5V to COM2 connector
Do not 5V to COM2 connector
JP11
1-2
2-3
Allow external reset from COM2 connector
Do not allow external reset from COM2 connector
JP12
1-2
2-3
BIOS detects 40 cond cable (UDMA33 max) Primary IDE
BIOS detects 80 cond cable (UDMA66/100 max) Primary IDE
JP13
1-2
2-3
BIOS detects 40 cond cable (UDMA33 max) Secondary IDE
BIOS detects 80 cond cable (UDMA66/100 max) Secondary IDE
JP14
1-2
2-3
CD-ROM is master on primary IDE
CD-ROM is slave on primary IDE
JP15
1-2
2-3
Normal operation
Clear CMOS
JP16
This is not a jumper. It allows Arium Emulator to reset the board.
indicates default jumper setting
